Trang chủ Thiết bị đo chỉ số điện có màn hình LCD

Thiết bị đo chỉ số điện có màn hình LCD

~~1,307,000₫~~ 1,111,000₫

Tiết kiệm đến
- 14% (số lượng có hạn)

Output Voltage accuracy: ± (0.5% + 1 digit)
Output voltage resolution: 0.01V
Output current: 0-12.00A
Input voltage range:V
Power module size: 93*71*41(mm) (L*W*H)
Display module size: 79*43*41(mm) (L*W*H)
Output Current accuracy: ± (0.5% + 2 digits)
Open size: 71mm*39mm
Length of connecting line: 200mm
Output voltage range: 0V-32.00V
Output current resolution: 0.01A
Output power range: 0-348W
Fixed hole center distance: 86mm, 64mm
General Information
The constant voltage and constant current programmable control power supply module put the collection of analog integration and digital control functions in one. Its adjustable output voltage range is 0-32.00V, step by 0.01V. Its adjustable output current range is 0-12.00A, step by 0.01A. This module has power-down stored function and can store 10 groups preset value. And it also has the function of extracting quickly two groups stored value. Compared with the traditional analog power supply, it is more convenient to quickly extract the voltage or current required. LCD display on the module has the function digital voltmeter and ammeter. You can view the preset voltage, input voltage, output voltage, the preset current, output current, output power, etc. on the output state remind area, you can see that output opens or not, the state of constant voltage and constant current, output is normal or not, the key is locked or not, and the current data groups that is being used. On the setting data interface, you can adjust overvoltage value, overcurrent value, over-power value, data set and LCD brightness. This module has many advantages, small size, advanced function, good visual effect, high operability, high-precision, being used independently, being inset into the device and been widely applied.
NOTE:
1, when you get the product in the first time, please don't use your hands to touch the components, because human static electricity can damage some chips.
2.You must make sure that the input voltage is 1.1 times higher than output voltage. Under large current circumstances, pay attention to heat elimination.
3. When the current is more than 10A or the temperature is more than 45 °c , the fan will begin to work. when the temperature is more than 65°c, the module will stop working
4, if you use AC-DC converter or transformer coil, please add rectifier (rectifier bridge) and filter (more than 4700uf filter capacitor). If input power supply is unstable, please add LC, L is over 47uf, C is over 2200 uf.

youtube feedback:
DPS 3012 Customer feedback video : https://www.youtube.com/watch?v=vcI_NJ_kcPI and https://www.youtube.com/watch?v=IgLjXuA64Fs
Package Included：1*voltmeter